best acoustic guitar luthiers image
Digital Ag
I bought for peanuts a 12-string acoustic guitar that needs some work...glue a nut back on for example.....I think I did that once for a classical guitar and it wasn't difficult...is it? What's the best glue to use?
Answer
Action height is very dependent on the string height off the first fret. This is adjusted by cutting the slots to the correct depth on the nut. It should be done by a professional luthier.
Do not use epoxy. It is common to have to replace/adjust the nut. If you epoxy it there may be damage to neck/fingerboard getting it back out. Use Elmer's Titebond or a similar glue. Do not use much.
At a guess, I would say the nut is probably cut correctly now. To check it. String the guitar (putting the nut in but not gluing it yet), tune it up, and try it. If you don't get fret buzz and it's not too difficult pushing the strings down to the first fret, you should be OK. Loosen the strings up (a lot - this might get a little messy) slide the nut out, coat the inside of the nut slot with Titebond, and put the nut back. Try not to slide it back in, if you can so as not to push the glue out. You might try it first dry to see if you can do it (see if the strings are loose enough).
Hint: I always down tune my twelve string acoustics one note (D instead of E) to make them easier to play and relieve a bit of that pressure on the neck. It is very common for twelve string necks to warp.
Action height is very dependent on the string height off the first fret. This is adjusted by cutting the slots to the correct depth on the nut. It should be done by a professional luthier.
Do not use epoxy. It is common to have to replace/adjust the nut. If you epoxy it there may be damage to neck/fingerboard getting it back out. Use Elmer's Titebond or a similar glue. Do not use much.
At a guess, I would say the nut is probably cut correctly now. To check it. String the guitar (putting the nut in but not gluing it yet), tune it up, and try it. If you don't get fret buzz and it's not too difficult pushing the strings down to the first fret, you should be OK. Loosen the strings up (a lot - this might get a little messy) slide the nut out, coat the inside of the nut slot with Titebond, and put the nut back. Try not to slide it back in, if you can so as not to push the glue out. You might try it first dry to see if you can do it (see if the strings are loose enough).
Hint: I always down tune my twelve string acoustics one note (D instead of E) to make them easier to play and relieve a bit of that pressure on the neck. It is very common for twelve string necks to warp.
What's a good beginner acoustic guitar?
Sara
I always played my friend's guitar and need to buy my own one.
What are some good suggestions on low-end acoustic guitars, as I am on a semi-budget.
Thanks for any help!
Answer
I second finding a good music store, preferably one that gives lessons and has a good, helpful staff. They should be able to help. I would caution against buying used, especially on Craigslist, until you've played for a bit and have some idea how to evaluate the condition of a guitar, especially an acoustic. You'll also want to have one set up properly so it plays nicely and stays in tune. Again, a shop with a good luthier on staff will help greatly.
As for specific brand recommendations, there are many great guitars. If you can swing something in the $350-$400 range new, a Seagull, Simon & Patrick or Art & Lutherie (all made by the same company in Canada) are great choices, as is the Taylor Big Baby, If you are looking to spend less, both Alvarez and Yamaha make some very nice, low cost acoustics.
I second finding a good music store, preferably one that gives lessons and has a good, helpful staff. They should be able to help. I would caution against buying used, especially on Craigslist, until you've played for a bit and have some idea how to evaluate the condition of a guitar, especially an acoustic. You'll also want to have one set up properly so it plays nicely and stays in tune. Again, a shop with a good luthier on staff will help greatly.
As for specific brand recommendations, there are many great guitars. If you can swing something in the $350-$400 range new, a Seagull, Simon & Patrick or Art & Lutherie (all made by the same company in Canada) are great choices, as is the Taylor Big Baby, If you are looking to spend less, both Alvarez and Yamaha make some very nice, low cost acoustics.
Powered by Yahoo! Answers
Title Post: Is nut height an action factor on acoustic guitar?
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
No comments:
Post a Comment